The shower is a commonly used piece of sanitary equipment in the bathroom, and proper maintenance can extend its service life and maintain a good water discharge. Here are 【topyoungs share】 some tips for maintaining your shower:
Regular cleaning
Frequency: It is recommended that the shower be cleaned every 3-6 months, depending on the water quality and frequency of use.
Method:
DISASSEMBLY: For removable showerheads, you can remove the nozzle part, soak it in white vinegar solution for a few hours, and then gently scrub it with a soft brush to remove limescale.
Non-disassembly: For showerheads that cannot be disassembled, use a soft-bristle brush dipped in a neutral detergent to gently scrub the surface of the showerhead and the water outlet holes.
Rinse: After cleaning, rinse thoroughly with water.
Attention to usage habits
Water temperature control: The water temperature should not be too high, long time use of high temperature water will accelerate the aging of the shower.
Avoid hard objects: Avoid hitting the showerhead with hard objects when using it to avoid damaging the surface.
Regular inspection: Regularly check whether the connection of the shower is loose, whether the hose is broken, timely repair.
Close the water inlet valve: When not in use for a long time, close the water inlet valve to prevent the residual scale in the water pipe from affecting the shower.
Other Precautions
Avoid the use of corrosive cleaning agents: Corrosive cleaning agents can damage the surface of the shower, affecting the appearance and service life.
Avoid excessive water pressure: Excessive water pressure accelerates the wear and tear of the shower's internal parts.
Pay attention to the installation position: when installing the showerhead, avoid installing it in a place where it is easily splashed by water, so as not to accelerate rusting.
Common problems and solutions
Poor water discharge from the shower: the water outlet hole may be blocked by scale, you can use a toothbrush or a fine needle to unclog it.
Shower leakage: check whether the connection is loose, if loose tighten in time. If the water leakage is serious, the internal parts may be damaged and need to be replaced.
The surface of the shower has scale: regular cleaning, you can use descaler or white vinegar solution to soak.
Tips to extend the service life of the shower
Installation of filters: Installation of filters at the water inlet can effectively filter impurities in the water and reduce the production of limescale.
Choose high quality material: when purchasing shower, try to choose the better material products, such as full copper material, corrosion resistance, long service life.
Regular replacement of sealing ring: sealing ring is easy to wear parts of the shower, regular replacement can effectively prevent water leakage.
Through the above maintenance methods, you can effectively extend the service life of the shower, maintain its good water effect, so that your bathing experience more comfortable.
